Proper Blower Fan Ventilation

The air we breathe indoors, the air that directly surrounds us, has a huge effect on a person who lives in it. Proper ventilation is essential and underplayed in the efficiency and health of a home or office. The following are some reasons why an HVAC contractor should be consulted to improve ventilation:

CLEANER

This is the most obvious reason for proper ventilation. What you put into your body tends to be what you get out. Poor air quality in the home or office means sitting in unhealthy air for the better part of your time. The pollutants and germs that float through the air from building materials and biological sources contribute to the quality of air, and thus the occupant’s health and productivity. A ventilation system with an effective air conditioning system will keep your Even if that air conditioning system is installed, however, it must be kept up as dirty filters and poor air conditioning maintenance will have just as detrimental an effect on health.

SIMPLIER in Air Control

A fairly unknown truth of ventilation is that not only does it improve air quality but it allows greater control of pressure in the home. To clarify, ventilation is not just about having more air coming in, but it is also about managing the air that is already in the environment. Air pressure control is a pretty useful tool for a few reason. The tighter the pressure, the easier it is to control the temperature and air circulation. In high air pressure, just a single fan or low air conditioning usage can effectively cool a larger area. However, in a looser, low air pressure environment, the air conditioning systems will have to work twice as hard to circulate the cool air. This also goes for purified air as the purified air will be circulated easier in a more condensed in a high pressure environment. The second reason is that ease of circulation means lower electric bills which leads to…

GREENER

… a better impact on the environment. Better ventilation and air control decreases the need to waste energy on running and air conditioning system, and filtration prevents VOCs (Volatile Organic Compounds) from building materials to leak into the environment and your air supply. Also, with green options being such a trend in home building, green energy systems are becoming a must to keep your home’s value at a competing level. Thus keeping your ventilation repaired will save some money as well as having a more positive impact on the environment.

Fresh air is just better for your health and overall quality of life. An intact ventilation system will improve health, your environmental impact, and decrease cost to run air conditioning systems. Improving your ventilation systems by calling an HVAC contractor or air conditioning repair specialist is something that should be done immediately, especially before summer kicks off and the air conditioning is running at its maximum.

For more information about proper ventilation and how it can help improve indoor air quality, visit Industrial High Pressure Blower Company web site http://www.highpressureblower.net/OEMFans.html

Alex Todorovo
Industrial Mechanical Process Engineer
High Pressure Blower Co.
alex.todorov@canadablower.com
http://www.highpressureblower.net/canadianbloweraxial.html
http://www.highpressureblower.net/MakeUpAirFans.html

Proper Ventilation

fan blower ventilator high temperature pressure industrial super transfer air gas positive negative heavy duty capacity process

alex.todorov@canadablower.com

fan,blower,ventilator,high,temperature,pressure,industrial,super,transfer,air,gas,positive,negative,heavy,duty,capacity,process

***

Tags: Backward Inclined Blowers, Backward Inclined Direct Drive Blower, Belt Drive Blower, Belt Drive Propeller Fans, Blower Fan Suppliers, Centrifugal Blower Fan, Centrifugal Power Fixed Fan,Centrifugal Power Foil Fan, Direct Drive Blower, Forward Curve Belt Drive Blower, Forward Curve Blower, High Temperature Blower,Industrial Blower, Industrial Blower Manufacturer, Industrial Blower Suppliers, Industrial Centrifugal Blower, Industrial Fans and Blowers,Industrial Pressure Blower, Inline Centrifugal Fans, Large Industrial Fan, Plenum Fans, Plug Pak Fans, Propeller Fans, Radial Blade Belt Drive Blowers, Radial Blade Blower, Radial Blade Direct Drive Blowers, Belt Drive Fans, Belt Drive Industrial Fans, Belt Drive Industrial Blowers, Belt Drive Blower Fan, Industrial Large Fans, Industrial Blowers Centrifugal,Industrial Direct Drive Radial Blowers, Large Industrial Blowers, Blower High Temperature, Fans Plenum, Industrial Plenum Fans, Plenum Fan Suppliers, Plenum Fan Manufacturer, Belt Drive Fan Suppliers, Belt Drive Fan Manufacturer, Industrial Centrifugal Blower Supplier,Centrifugal Blower Fan Manufacturer, Propeller Fan Suppliers, Propeller Fan Manufacturer, Belt Drive Radial Blower Supplier, Direct Drive Blower Supplier, Belt Drive Blower Manufacturer,High Temperature Blower Suppliers, High Pressure Blower Supplier,Suppliers Centrifugal Fans,Manufacturers Centrifugal Fans, Centrifugal Industrial Power Fixed,Centrifugal Power Fixed,Centrifugal Power Foil,Industrial Centrifugal Power Fixed,Industrial Forward Curve Blower,Forward Curve Industrial Blower,Forward Curve Blower Supplier,Forward Curve Blower Manufacturer

Residential and Commercial Extractor Fans

Extractor fans have become so common these days that we automatically turn them on, as soon as we enter the kitchen and bathroom. They have become integral part of modern living, as they help to provide a sigh of relief by removing the suffocation foul air. You need to install extractor fan at all such places where you face the problem with lack of ventilation. Therefore, it is doubtless to say that you need to have them not merely in the houses, but also in the production units, cellars and warehouses. Since, it is not easy to bear the stale air for a longer time, you can find the extractor fans to be highly beneficial for the users, as they extract out the stagnant air so that fresh can fill the vacant space within a few minutes.

When you cook food in the kitchen, you will have to face the rising temperature in the atmosphere due to the combustion of fuel. Besides this, the kitchen area usually gets filled with the smoke, steam, and odours of various edibles, and all these things might cause uneasiness for the cook. He can be relieved of all such issues merely by turning on the extractor fan that will help removing the hot and greasy air from the kitchen room. From several years, when people construct a new building, they take care to keep the ducts for the installation of extractors at all such rooms that have little space for venting the foul air. We can say that they have become integral part of all the domestic and commercial buildings, and we have become so habitual of using them that sometimes we fail to realize their importance, unless we have to spend a day or two without them.

Bathroom is yet another place that demands the usage of extractor fan. Besides this, you can install them in garage, store rooms, basement hall, and cellars. A large variety of extractor fans is available in the market, and you need to choose them as per their capacity, size, design and the cost factor. Obviously, if you are going to buy the extractor fan for production unit and industrial setup, you will have to take care of its size and capacity, because you need to use them for ventilating the large spaces. However, the common people are usually concerned about purchasing the electrical appliances for domestic use.

If, you are planning to buy extractor fans for your newly constructed house, then it will be beneficial to check the brand of the product, because it helps you to judge the quality of the product. Secondly, you should buy the electrical products from a known supplier, because the reputable electrical suppliers are known to pay attention towards customer feedback. Most of them have their websites that describes the products available with them. You can also make inquires, and place an order online, without any hesitation, because they will not let you down in any case. Furthermore, they will attend to your grievances, if something goes wrong after purchasing the products, through their website. Therefore, if you have already managed to arrange the finances for the purchase of extractor fans for domestic purposes, you should proceed with it without any hesitation.

Additional information can be found at the Industrial Fan Blower company web site http://industrialfanblower.net

Oleg Tchechel
Developer of Industrial Air Make-Up Units
Industrial Fan Blower Co.
asap@buffalofan.com
http://http://www.industrialfanblower.net/cbd_about_us.htm
http://www.industrialfanblower.net/cbd_services.htm

Industrial Extractor Fans

air handling unit airhandler AHU conditioner industrial commercial ventilator fan blower building ventilation ventilating cooling heating circulation circulating roof top supply

asap@buffalofan.com

industrialfanbl

ventilator,fan,blower,centrifugal,axial,radial,pressure blower,high temperature,high pressure,PRV,propeller,industrial,building,ventilation,ventilating,high volume,air,circulation,circulating,wall,roof,exhaust,supply,wheel,blade,impeller

***

Industrial Propeller Fans and Industrial Blowers

Electrical generators require the most reliable equipment for their air-cooling and ventilation needs. The fans used in these systems are mounted onto gas-turbine generator packages for use in power plants as well as on cruise ships, oil rig platforms, and mobile generators. These systems are loaded onto tractor-trailer rigs or barges and moved to a site to generate power for events like the Super Bowl and concerts. Manufacturers of these gas-turbine generators are realizing it pays to have the right fan for the job from the start and are turning to Buffalo Fan to provide these unique solutions.

Resilient Industrial Blowers

A key requirement for these applications is that the fans need to be exceptionally corrosion resistant to withstand these severe environmental factors.

Noise attenuation is a major issue for power generators, both to protect workers’ hearing and to keep operation at the quietest level for any surrounding residential or business communities.

High Performance Fans & Blowers

Power generation is a complex process. The power generation fan / blower equipment should be tough enough to avoid operational failure and to minimize installation and repair work. The rugged, high performance fans Buffalo Fan provided to a state-of-the-art hybrid energy center, were ideal for the task. Aerovent was chosen for this project because of their reputation for building large custom fans for extreme industrial applications. The energy center’s primary requirement was that its chosen vendor be able to design and build a set of the most rugged, efficient roof ventilators within budget. Most roof ventilator fans last between 10 and 20 years when properly maintained. Because of the permits and cost involved in performing maintenance work on the roof of a power plant, they wanted their fans to have a longer life span (up to 40 years). This lifespan requirement meant that the fans had to be constructed using industrial grade materials and components.

Propeller Fans

Northern Fan propellers provide equal airflow in both directions. Other companies’ fans have a standard-exhaust one-direction propeller and are run backwards for the supply mode, producing about 40 percent of exhaust-mode airflow. ABuffalo Fan blowers produce 100 percent airflow in either direction. Aerovent also produced an integrated electrical control system guaranteed to work with its fans instead of the power plant having to acquire a separate system from another source. The system features an onboard starterdisconnect switch, which boosts the motor’s start and can be easily disconnected.

Industrial Blower Safety

Fire safety is a challenge in any environment, and especially so in a power plant. In case of a fire, the first priority is to ensure the safety of employees. Another goal is to be able to salvage expensive equipment in the building. With ventilation fans, if the motor fails during a fire, it is more beneficial if the fan’s dampers automatically fail in the “open” position, and allow smoke to escape.

Custom Industrial Fan Design

Northern Fan’s expertise in custom-building fans for complex applications, like this energy center, allowed them to design and construct a special fire damper for the fans. When the motorized damper is activated, a metal linkage arm attached to the damper blades moves to open or close the damper.

Northern Fan Co. custom made damper features a fusible linkage arm with a “soft metal” section in the link. When temperatures reach 212 degrees (as in the case of a fire), the soft metal plate fails, breaking the linkage, and a heavy counter weight swings the damper into the “open” position.

Additional information can be found at the Northern Fan company web site http://northernindustrialsupplycompany.com/company.html

Oleg Tchetchel
Industrial Air Handling Systems Engineer
Northern Fan Co.
nis@primus.ca
http://www.northernindustrialsupplycompany.com/products/heat_exchangers.html
http://northernindustrialsupplycompany.com/products/humidifiers.html

Turbo Pressure Blower

nis@primus.ca

turbo blower,pressure blower,high pressure fan,high pressure ventilator,high pressure blower,regenerative blower,side channel blower

buffalofancom

***

Industrial Blower Fan Ventilation System

This article will discuss options for improving energy efficiency when designing an HVAC system and selecting a fan. HVAC design engineers face many choices throughout the planning process, perhaps few as crucial as that of fan equipment, a principal consumer of energy.

Industrial Blowers & Fans Flow Rates

Flow rates are predetermined based on space type and occupancy. Although local codes determine minimum requirements for HVAC systems, ASHRAE Handbook – HVAC Applications provides general design criteria for various commercial and public buildings. These criteria include air movement, room circulation, noise, and filter efficiency. Although all are important, room circulation, in air changes per hour, typically determines airflow requirements. Because flow rate is driven by design criteria, a design engineer’s primary means of reducing energy use is to minimize the static pressure needed to move air through a system.

Air Movement and Control Association (AMCA) International defines system pressure loss as “the sum of the static-pressure losses due to friction, shock, dissipation of velocity pressure at the system discharge, and the static-pressure differences between the entry and discharge openings of an air system. The static pressure a fan must overcome is dependent on many variables, only some of which the design engineer can control. The location of equipment often is determined by the architect and, therefore, limits the engineer’s options.

Blowers and Fans Duct Configuration

Duct configuration and fittings used to connect components are large contributors to static pressure. Other sources of system pressure loss are balancing and control dampers, variable-air-volume (VAV) boxes, diffusers, louvers, coils, filters, and other components in an air stream. Given that velocity pressure is proportional to the square of velocity, pressure loss in most of these components is proportional to velocity squared. This makes size an important factor, as cross-sectional area dictates fluid velocity. For example, reducing air velocity throughout a system by 10 percent would result in a 20-percent reduction in system static pressure. With air power proportional to pressure, this would equate to a 20-percent reduction in energy consumption.

In addition to accounting for all static-pressure loss in a system and achieving required room airflow, a design engineer must adhere to Section 6.5.3 of ANSI/ASHRAE/IESNA Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings, which limits the power (horsepower) a fan can consume per cubic foot per minute of airflow the fan generates. With flow requirements defined, a design engineer must limit system static pressure to meet this power limitation.

System Effect and Industrial Fans and Blowers

A major contributor to energy consumption that often is ignored is system effect. AMCA International defines system effect as “a decrease in fan performance capability, observed as a pressure loss, which results from the effect of fan-inlet restrictions/obstructions, fan-outlet restrictions, or other conditions influencing the performance of the fan when it is installed in a system.”2 System effect is a reduction in a fan’s ability to generate pressure and can be looked at as an additional system pressure loss. It can lead to underperformance, excessive noise, and vibration in a fan and system.

System Effect and Fan Curves

System effect can be described by its impact on a fan curve. Fan curves are produced from laboratory testing, with fans configured for ideal installations. Testing is performed in accordance with ANSI/AMCA Standard 210-07/ANSI/ASHRAE Standard 51-2007, Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating. A fan curve displays performance for a constant speed (revolutions per minute) in terms of static pressure vs. volumetric flow rate. In Figure 1, the intersection of the system-resistance curve and the pressure curve is the operating point of the fan. To move along the system curve to alter fan performance, one must increase or decrease fan speed accordingly. Operating power is where the power curve intersects with a vertical line running through the operating point.

Ideal Industrial Blower Fan Inlet & Outlet Conditions

The ideal inlet and outlet conditions under which fans are tested rarely are seen in the field. As a result, a fan will overperform or underperform in terms of flow rate, static pressure, or both. In Figure 2, a suitable fan was selected, but system effect was ignored. The blue lines represent how the fan would perform under AMCA International test conditions. Actual measured performance is indicated by the red dot. The red line shows how the fan would perform in an AMCA International air test when operating at design speed, but takes into account system effect. The only way to achieve the desired performance is to speed the fan to the rate designated by the green line. The consequence is a higher operating speed, higher brake horsepower, and higher sound levels.

Propeller Fan & Tube Axial Fan Selection

Another key to reducing power consumption is fan selection. Generally, propeller or tube-axial fans are more efficient for relatively low static pressures, while centrifugal-type fans are used for relatively high static pressures. Too often, fan selection is based solely on first cost. The consequence is that a relatively small-diameter, high-speed fan is used. A small fan operating at a high speed generally requires more operating power and produces more noise than a large fan operating at a low speed.

Most of the energy lost in a system is converted to heat. For example, mechanical and electrical energy losses in a fan motor raise the surface temperature of the motor. If the motor is in an air stream, the heat will be transferred directly to the air.

Belt Dive Propeller Fans and other Blower Fan Systems

In a belt-driven system, losses are the result of belt friction, slippage, and / or flexing. All such losses are converted to heat and, if the belt drive is in an air stream, increase the temperature of air. Fan losses quantified by fan efficiency contribute to air-temperature rise as well. As a fan works on a fluid, the friction attributed to the airflow decreases the fan’s efficiency and creates heat. As the efficiency of a system decreases, air-temperature rise increases. In a cooling application, this means increased energy consumption on the part of the compressor. Minimizing inefficiencies results in energy savings. It is the engineer’s responsibility to minimize total system pressure through proper design and layout. This involves balancing economics and efficiencies in specifying a fan. But not all responsibility resides with the engineer. The contractor must ensure appropriate equipment is installed and not base decisions solely on the lowest bid. The contractor needs to be aware of the consequences of poor installation and minimize system effects.

The losses accrued in a system directly affect the system’s power consumption while indirectly increasing the energy consumed by other processes. Energy losses in the form of heat equate to higher operating costs.

Because performance conditions are mandated by codes, proper system design, equipment selection, and installation are the most effective means of minimizing inefficiencies and saving energy.

Additional information can be found at the Northern Industrial company web site http://www.northernindustrialsupplycompany.com/products/air_handling_units.html

Oleg Cthetchel
Canadian Ventilation HVAC Engineer
Northern Industrial Co.
asap@buffalofan.com
http://www.northernindustrialsupplycompany.com/request.html
http://www.northernindustrialsupplycompany.com/outside/request2.html

Ventilation Systems Engineering

asap@buffalofan.com

northernindustrialsupply

northernindustrial

ventilation fan,ventilating fan,ventilation blower,ventilating blower,air supply fan,air supply ventilator,air supply blower

northernin

northernindustrial

nisco@primus.ca

***

Axial Roof Ventilators

Axial Hooded Power Roof Ventilators are offered with optional filter rack and filter package protected by bird and insect screen. Motorized back draft dampers are standard on all supply air fans. Filtered mushroom head features channel type filter racks, bird screen, hinged connection to the stack box. Special coatings are available upon request. Fan panel is of double orifice design to allow for supply / exhaust, or reverse-flow operation. Discharge diffusers are available in variety of styles.

Power Roof Ventilators

PRV Northern Fan Power Roof Ventilators provide clear evidence of the continued leadership of Northern Fan in the area of ventilating fan packages for industrial and commercial ventilation. Northern Fan supplies axial hooded fans covering sizea ranging from 12″ to 120″ wheel diameters with capacities from 2000 CFM to 200,000 CFM, and heating capacity up to 4,500,000 BTU/hr.

Axial Exhaust Power Roof Ventilators

Northern Fan Axial Exhaust Power Roof Ventilators are factory assembled package units constructed to withstand hurricane winds. Its construction incorporates mushroom head, or hood head with bird screen, which is hinged to a box-style stack, supplied with access door. For higher capacities stack can be substituted with tubeaxial, or vaneaxial fan. Curb caps are welded to the curb side of the stack. Fan panel assembly is located near the top. Back-draft stack dampers are standard option. Disconnect safety switch is mandatory for roof mounted units.

What is an Exhaust Fan

An exhaust fan is a mechanical ventilation device that helps to draw out stale and impure air from your home and bring in fresh air, thereby improving the quality of indoor air. Exhaust fans are typically ducted to the exteriors of your house, through which bad indoor air can effectively be removed from your living space.

Exhaust fans are very effective at any building ventilation. Without proper ventilation, the air inside your home can get filled with harmful contaminants and disease causing pathogens.

Air Roof Ventilators

Northern Fan Make-Up Air Roof Ventilators are available with direct gas fired heater, or steam / hot water coil packages. Seven arrangements are available for efficient control of the air flow in various modes on operation: fresh air / return air / by-pass air, in various mounting arrangements.

FRP Construction – Fiber Reinforced Polyester corrosion resistant construction is available for all Northern Fan hooded power roof ventilators along with protective coatings for corrosive exhaust fumes, or atmosphere, including synthetic vinyl plastic and cathalytic epoxy coatings.

Corrosion resistant construction and chemical duty construction: for corrosive environment all fans are avaialble in 304 SS, 316 SS, or 316 L stainless steel construction. Spark resistant construction is available in all aluminum construction; Northern Fan wheels are made of special alloys for non-sparking airtsream construction.

Additional information can be found at the Northern Fan company web site http://www.northernindustrialsupplycompany.com/products/air_handling_units.html

Oleg Cthetchel
Canadian Ventilation HVAC Engineer
Northern Fan Co.
airknife@cogeco.ca
http://www.northernindustrialsupplycompany.com/request.html
http://www.northernindustrialsupplycompany.com/outside/request2.html

Industrial Power Roof Ventilator

airknife@cogeco.ca

Oleg Tchetchel

chicagoblower

fan, ventilator, blower, exhaust, supply, filtered, axial, hooded, upbalst, downblast, skyvent, Power Roof Ventilator,wall fan, wall propeller fan, prop fan, propeller fan

***

Proper Operation of Axial & Centrifugal Blowers and Fans

Proper Operation of Axial Blowers and Fans

In axial flow fan the air must blow in line with the axis of rotation and there must be blades with space between them. With few exceptions, the axial blower or fan must not have a lot of back pressure and will work a lot better if the blade is shrouded. One obvious exception is the turbine compressor used in jet engines, but this requires very tight fittings and very high speed so the air is being rammed in against the outgoing air much faster than it can move – it uses a lot of power and makes a lot of noise. Shrouding works better because the greatest loss in an unshrouded fan is the air coming off near the tips and immediately turning out and back circulating only through the fan and not through the room. The most common shrouded fan people see is muffin style fan in computers. An axial blower can have multiple sets of blades and the blades can even over lap so light is not visible through the fan. Fans are used most often for moving large quantities of air between spaces at atmospheric pressure.

Centrifugal Blowers

Centrifugal blowers come in a number of forms of which the most common is the squirrel cage blower. The common factor is the air is moving perpendicular to the axis of the part that is moving the air. Typically, the air is drawn in through the side of the unit, turns at low speed to encounter the inside of a spinning cylinder with ribs or vanes around the wall of the cylinder which fling the air out and away where it is captured and aimed through an outlet much smaller than the inlet. Think of taking an open tin can, drilling a hole in the center of the bottom to take a bolt as an axle and cutting slots up the sides, bending the material of the slots in, then spinning it with a drill. A variation looks like a plate with ribs running from the center and increasing in height toward the rim, the air being thrown off the rim. The name squirrel cage comes from the appearance like the tread wheel small rodents use for exercise – I suspect it is not called a hamster tread wheel because that is too precise – or childish. Blowers can have higher output pressures, but not a lot higher and they lose capacity rapidly with increasing pressure.

Common Blower Uses

Aside from the small squirrel cage blowers used on some electrical equipment, the most common blowers of this type are the units used for drying carpet after cleaning or a fire, the blowers used for leaf sweeping and the unit hidden inside a vacuum cleaner.

Industrial Blower Installation

Caution is necessary in selecting blowers for series installation. It is generally accepted that most pre-engineered blowers are capable of withstanding twice their catalog rated static pressure. In other words, where two blowers are installed in series the second blower housing should withstand the higher pressure. There is, however, a need for concern when the combined pressure exceeds twice the rated static pressure for one blower. In series applications involving three or more blowers, or in any system in which positive or negative pressure exists prior to the consideration of the blowers, special housing reinforcement may be necessary.

For additional information please refer to http://www.northernindustrialsupplycompany.com/outside/request4.html

Oleg Chetchel
Industrial Process Equipment Engineer
Northern Industrial Co.
http://www.northernindustrialsupplycompany.com/outside/request5.html
http://www.northernindustrialsupplycompany.com/outside/request3.html

Ventilator, Fan and Blowers

fan blower ventilator high temperature pressure industrial super transfer air gas positive negative heavy duty capacity process

fan@cogeco.ca

fan,blower,ventilator,high,temperature,pressure,industrial,super,transfer,air,gas,positive,negative,heavy,duty,capacity,process

***

Industrial Blowers, Fans and Ventilation

In almost any building or room used for commercial and industrial operations, it is quite likely that there are recurrent conditions that cause personnel discomfort. This is particularly true unless an expensive system for the circulation of refrigerated air (air conditioning) has been provided. In mild to hot weather, the discomfort of individuals is generally due to the build-up of intense heat within the structure. This becomes a severe problem in summer because the sun load on the building is added to the normal sources of heat build-up within the building. Most buildings have sufficient ventilation to remove smoke and fumes detrimental to health. However, it is unlikely that that system contributes very much toward the comfort of the individuals who occupy the mom or building.

Industrial Blowers and Fans for Ventilation

Humans are warm blooded animals whose normal body temperature is 98.6° Fahrenheit. However, we are most comfortable when the air temperature around us is in the 72°-to-78° range. If there is air motion around us, the effect of “wind chill”, or evaporative cooling, enables us to feel comfortable in a much higher air temperature. As the natural air temperature in most non-air conditioned buildings is much warmer than outside air temperatures, the problem of keeping humans comfortable is primarily a cooling problem. Of course, this is not the case in periods of very cold weather. Our purpose is to discuss the environmental problems that frequently exist in periods of moderate to hot weather. An effective, economical solution of these problems is vital to the success of any business.

Proper Industrial Fan Ventilation

If an individual is to produce maximum results, he must be allowed to function in an environment as nearly ideal as can be provided. In fact, the benefits in terms of efficiency and productivity can be substantial. Failure to provide a comfortable environment can be very expensive in terms of errors, work slow-down, complaints, absenteeism, etc. If the major factor is a hot, humid atmosphere, which may include smoke, dust, fumes or other irritants, a practical and effective approach to the problem is available. To obtain a reasonable degree of personnel comfort in hot weather, there are three basic factors that should be provided for in the ventilation and cooling system of a commercial or industrial building.

How to Remove Superheated Air Using Industrial Blowers & Fans

When the air temperature in the occupied area of a room or building exceeds 78° to 82°; most individuals begin to feel uncomfortably warm. The first step toward controlling the problem is to provide for the removal of excessively hot air from the building. This superheated air frequently mixes with the air in cooler areas of the building to produce an overall temperature increase. As superheated air is frequently localized around heat-producing machinery, it should be exhausted from the building near its source. This will prevent some undesirable air temperature increase in other areas. As a rule, outside air temperatures are considerably cooler than those inside a building. As superheated air is exhausted, provision should be made to replace it with fresh, cooler, outside air. Exhaust air in many areas of a building may have a temperature of 125° to 150°. This is usually the case where heat-producing machinery is in use. Similar air temperatures frequently occur near the roof or ceiling where rising warm air is trapped and further heated by the sun load on the roof. When this high temperature air is replaced by outside air, a substantial improvement in the average air temperature of the building results. Even where outside air temperature may be in the 80s or 90s, invariably it is 15° to 20° cooler than the air it replaces. This is a very important improvement to the individuals affected.

Industrial Blower Fan “Breeze Conditioning”

A very effective way to overcome the discomfort of a hot, stuffy room is to create a breeze. Before refrigerated air systems were invented, mechanical fans of every description were used to provide air circulation. The circulation of air over a person’s body immediately causes a cooling effect on the skin. When air is passed over a moist surface, it will evaporate some of the moisture and thus lower the temperature of the surface. This is precisely what occurs when air circulates across the human body.

By creating a gentle breeze throughout a room or area, a great deal of cooling comfort is provided for individuals who must work there. This pattern of air circulation is called “breeze conditioning” by Canada Blower engineers. It is effective even when the air temperature may be 85°’ to 95°. When this air circulation is achieved in combination with the factors mentioned in the paragraphs above, a very effective and practical solution is provided for the problem of personnel discomfort in hot weather.

For additional information please refer to http://canadablower.com

Susan Terlitski
Industrial Process Engineer
canadablower@canadablower.com
Canada Blower
http://www.canadablower.com/hvac/index.html
http://www.canadablower.com/oem/index.html

Commercial Building Ventilating

canadablower@canadablower.com

power roof fan,power roof ventilator,power wall fan, power wall ventilator,roof exhaust fan,wall exhaust fan,roof exhaust ventilator,wall exhaust ventilator

buffaloblowercom

buffaloblo

***

Industrial Fans and Blowers vs Commercial Fans & Blowers

There is a difference between industrial and commercial grade fans construction. Industrial equipment is specifically designed and built to stand up to the rigors of an industrial application. The differences are concrete and easy to spot…if you know what to look for. Canada Blower designs and builds equipment strictly for industrial applications and has been doing it that way for over 100 years. Industrial fans and blowers are constructed of heavier duty materials and with higher quality components than their commercial counterparts. When properly applied, industrial equipment can withstand vibration, high and low temperatures, fumes and corrosive gases, materials in the airstream, and many other situations in an industrial environment. The equipment is built to provide longer service life, thus decreasing the need and frequency for replacements. Because industrial fans are expected to last longer, they are designed to be easy to install and maintain.

Industrial Blower Fan Features vs Commercial Blowers Fans

The best way to see the difference between an industrial product and a commercial product is to compare them feature for feature, including product weights. In the below example we’ll look at commercial panel fans versus Canada Blower industrial panel fans. The commercial grade panel fan has sheet metal, riveted blades, and a riveted hub. Canada Blower industrial panel fans have a solid, one-piece cast aluminum airfoil propeller or a cast aluminum adjustable pitch propeller. Lighter fans sometimes have balance weights clipped, bolted, or welded to the back of the fan blades, which can fly off during operation. Canada Blower cast aluminum propellers are precision ground and balanced, and therefore require no balance weights.

Industrial Fan Aerodynamic Design

Another difference between the commercial and industrial fan is in the aerodynamic design. Canada Blower originally developed the air seal venturi to improve performance. With this design, the propeller is larger in diameter than the venturi opening, thus creating an air seal. This design eliminates back flow of air pressure and increases air delivery by 10% or more. The way most other panel fans are designed, the propeller is smaller than the venturi opening. This type of fan is easier to manufacture, but significantly less efficient. The basket fan provides even less value because of the air that is lost around the sides of the fan. A Canada Blower venturi design fan pushes the air velocity from the blades out the front of the fan for increased spread and throw versus a commercial type fan.

Industrial Fans for Shipment

There are also installation differences to consider when purchasing a panel fan. Many commercial fans are shipped in parts. The motor and accessories may be shipped loose and must be assembled to the fan when received. In addition the commercial fan shown on the previous page has no provision for panel mounting or for accessory mounting. This means holes for bolts and mounting hardware must be drilled even before it can be completely assembled or installed. Canada Blower panel fans are shipped completely assembled and ready to install. A large selection of industrial fans are available from the stock program for quick shipment, including panel fan ventilators. You can be sure that Canada Blower equipment will provide many years of continuous service in your industrial air moving environment !

For additional information please refer to http://www.canadablower.com/index.html.

Susan Terlitski
Building Ventilation Specialist
Canada Blower Co.
http://www.canadablower.com/fans/index.html
http://www.canadablower.com/inquiry/index.html

Commercial vs. Industrial Fan

canadablower@canadablower.com

industrial process fan,industrial process blower,industrial process ventilator,commercial fan,commercial blower,commercial ventilator

canadablow

***

Industrial Blower Supplier

Canada Blower / Buffalo, New York supplies highly specialised blower packages for the nuclear industry and equipment for a number of other applications, including gas CO2 circulator blowers, or submerged blowers, that provide the heat transfer in the Advanced Gas cooled Reactors and which in turn provide substantial part of nuclear generated electricity; units that once installed operate with no maintenance during plant operation. Centrifugal and axial fans are also provided for the cooling and other auxiliary systems.

Large Industrial Blowers & Fans Applications

Canada Blower / Buffalo, New York fans and blowers are used in a variety of applications throughout industry, ranging from providing air for combustion, process aeration, fermentation, drying, cooling and conveying; for extracting dust or fumes, and for handling any type of unusual gas. As an illustration of the diversity of uses for our products, some applications are:

FOOD INDUSTRY Industrial Blowers & Fans

– fans for boiler plant in distilleries, breweries and food processing plant. Fans to provide air for germination and drying in maltings.
– Turbo pressure blowers to provide air for fermentation in yeast plants and side channel pressure blowers to handle carbon dioxide.
– Process fans for heating, hot air recirculation, drying, cooling and ventilation for flour mills, bakeries, cereal and chocolate production, and many other food processes.
– Turbo blowers for carbon dioxide injection for sparkling water and wine.

PHARMACEUTICAL Industrial Fans and Blowers

Specialised process fans and pressure blowers.
Fans for utility services.
Clean room ventilators.

GLASS PRODUCTION Industrial Blowers & Fans

Fans for furnaces and for cooling/tempering.
Turbo pressure blowers for high pressure gas storage.

More Industrial Blowers and Fans Uses

For the more common water cooled reactors, Canada Blower / Buffalo, New York supply the fans associated with the various safety systems and reactor building cooling, and the diaphragm turbo pressure blowers for radioactive gas leak recovery. Where these gases have to be compressed to high pressure the turb blowers that are mainly preferred. Encapsulated blowers have been used in the auxiliary systems of demonstration fusion reactors.

Centrifugal Blowers and Centrifugal Fans

For reprocessing plants, specialised centrifugal fans are used for cell cooling and turbo pressure blowers – for pressure testing. For decommissioning, centrifugal fans are used in ventilation and cooling.

For additional information please refer to http://canadablower.com

Susan Terlitski
Building HVAC Specialist
Canada Blower Co.
canadablower@canadablower.com
http://canadablower.com/inquiry/index.html
http://www.canadablower.com/news/index.html

Blowers and Fans from Canada Blower (Buffalo, New York)

canadablower@canadablower.com

high pressure blower,fan,ventilator,industrial,OEM,centrifugal,axial,blower,New York Blower,radial,vaneaxial,tubeaxial

nybfan

nisco

***

Industrial Blower Fan Ventilation

Aeration involves moving air through either a solid or fluid medium bed and is used for various purposes. Depending on specific material being aerated, our fans are utilized for moisture control in applications such as grain bin storage, and also provide oxygen and control moisture/temperature in composting applications. Due to varying environmental conditions, fans used in aeration systems often require special construction such as fiberglass, alloys and specialty coatings.

Industrial Fans for Ventilation

The treatment of wastewater can result in a variety of unwanted and hazardous gases, such as H2S and SO2. As the application specialists, Northern Fan has the expertise needed to supply the proper air moving equipment that is specifically designed for resisting the corrosive nature of these compounds. In other pollution control systems, our fans are installed on the clean side, which offer a higher efficiency design for moving gases into a scrubber or other device. One of the major challenges in wastewater and sewage treatment plants is controlling the odors that are emitted. These plants are often located in residential areas and forced to adhere to strict codes and regulations. These odors are caused by gases such as hydrogen sulfide and ammonia. To reduce odor emissions a variety of systems have been found effective, such as thermal oxidation, chemical scrubbers and biofilters. The fan requirements in these processes are similar in that they require special alloys, coatings or fiberglass construction.

Proper Industrial Blowers & Fans

Through decomposition, landfills produce syngas, a combination of methane carbon monoxide, and other hazardous gases. To avoid dangerously high levels of these gases, forced draft fans are used to drive fresh air into the landfill mass. Induced draft fans are also used for pulling noxious gases out of the landfill for safe disposal or for collecting them as a fuel source. The fans used in these applications often require special materials or coatings along with spark resistant construction. Depending on your specific needs, Northern Industrial Supply Company Fans & Blowers will work with you to select the proper air moving equipment.

High Volume Industrial Blowers and Fans

High volume, low concentration or non-condensable gases refers to gases that are in concentrations below their explosion limit. These gases are drawn through an induced draft fan and then processed with a RTO (regenerative thermal oxidizer) or incinerator that ultimately burns the gases for safe disposal. HVLC gases are often corrosive and at elevated temperatures, that is why we provide a number of fans that are corrosion resistant. In addition, we offer leak-tight construction to avoid emitting these toxic, flammable gases into the environment. In the case that these gases are above their explosion limit, Buffalo Blower supplies a full line of non-sparking fans that allow for the safe movement of hazardous gases. Based on your specific requirements, our fans can be constructed with aluminum and monel materials.

Large Industrial Ventilation Fans

In a manufacturing environment, vacuum systems are used to move and transport waste material. Sawdust, metal shavings, and other waste is easily transported away from work areas to a specified collection point for simplified clean up and removal. Vacuum systems are also used to provide suction for the manipulation of components, various materials and forming processes. These systems usually consist of long runs of relatively small diameter pipe or ducting. This results in the need for high pressure low flow fans.

Boiler Application Industrial Blower Fans

Boilers are used in a variety of industries for producing heat and energy. Many boiler applications will burn fuel readily available on site, such a byproduct from the given process. An example of this is Bagasse, which is a fibrous matter that remains after sugarcane is processed to extract their juices. The bagasse is a biofuel used for many boiler applications. Fans in boiler applications are forced draft, induced draft, over fire air and combustion air.

Large Industrial Fan Characteristics

At this juncture it is prudent to reiterate that a fan running at a particular speed can have an infinite number of operating points all along its characteristic curve. The fan will interact with the system to produce an operating point at the intersection of the system curve and the fan curve. Note that it is the system in which the fan is installed that will determine the operating point on the fan curve. Thus it is vitally important that the system designer accurately determine the system losses in order to ensure that the actual air flow rate is as close as possible to the design air flow rate.

For additional information please refer to http://www.northernindustrialsupplycompany.com/outside/request4.html

Oleg Chetchel
Industrial Process Equipment Engineer
airknife@cogeco.ca
Northern Fan Co.
http://www.northernindustrialsupplycompany.com/outside/request5.html
http://www.northernindustrialsupplycompany.com/outside/request3.html

Industrial Processes Ventilating

airknife@cogeco.ca

combustion blower,turbo blower,high pressure blower,pressure blower,industrial,regenerative blower,side channel blower

industrial ventilation,industrial ventilating,industrial fan,industrial blower,industrial ventilator,industrial pressure blower

buffaloblowercom

buffalofancom

***