Industrial Blower Fan Ventilation

Aeration involves moving air through either a solid or fluid medium bed and is used for various purposes. Depending on specific material being aerated, our fans are utilized for moisture control in applications such as grain bin storage, and also provide oxygen and control moisture/temperature in composting applications. Due to varying environmental conditions, fans used in aeration systems often require special construction such as fiberglass, alloys and specialty coatings.

Industrial Fans for Ventilation

The treatment of wastewater can result in a variety of unwanted and hazardous gases, such as H2S and SO2. As the application specialists, Northern Fan has the expertise needed to supply the proper air moving equipment that is specifically designed for resisting the corrosive nature of these compounds. In other pollution control systems, our fans are installed on the clean side, which offer a higher efficiency design for moving gases into a scrubber or other device. One of the major challenges in wastewater and sewage treatment plants is controlling the odors that are emitted. These plants are often located in residential areas and forced to adhere to strict codes and regulations. These odors are caused by gases such as hydrogen sulfide and ammonia. To reduce odor emissions a variety of systems have been found effective, such as thermal oxidation, chemical scrubbers and biofilters. The fan requirements in these processes are similar in that they require special alloys, coatings or fiberglass construction.

Proper Industrial Blowers & Fans

Through decomposition, landfills produce syngas, a combination of methane carbon monoxide, and other hazardous gases. To avoid dangerously high levels of these gases, forced draft fans are used to drive fresh air into the landfill mass. Induced draft fans are also used for pulling noxious gases out of the landfill for safe disposal or for collecting them as a fuel source. The fans used in these applications often require special materials or coatings along with spark resistant construction. Depending on your specific needs, Northern Industrial Supply Company Fans & Blowers will work with you to select the proper air moving equipment.

High Volume Industrial Blowers and Fans

High volume, low concentration or non-condensable gases refers to gases that are in concentrations below their explosion limit. These gases are drawn through an induced draft fan and then processed with a RTO (regenerative thermal oxidizer) or incinerator that ultimately burns the gases for safe disposal. HVLC gases are often corrosive and at elevated temperatures, that is why we provide a number of fans that are corrosion resistant. In addition, we offer leak-tight construction to avoid emitting these toxic, flammable gases into the environment. In the case that these gases are above their explosion limit, Buffalo Blower supplies a full line of non-sparking fans that allow for the safe movement of hazardous gases. Based on your specific requirements, our fans can be constructed with aluminum and monel materials.

Large Industrial Ventilation Fans

In a manufacturing environment, vacuum systems are used to move and transport waste material. Sawdust, metal shavings, and other waste is easily transported away from work areas to a specified collection point for simplified clean up and removal. Vacuum systems are also used to provide suction for the manipulation of components, various materials and forming processes. These systems usually consist of long runs of relatively small diameter pipe or ducting. This results in the need for high pressure low flow fans.

Boiler Application Industrial Blower Fans

Boilers are used in a variety of industries for producing heat and energy. Many boiler applications will burn fuel readily available on site, such a byproduct from the given process. An example of this is Bagasse, which is a fibrous matter that remains after sugarcane is processed to extract their juices. The bagasse is a biofuel used for many boiler applications. Fans in boiler applications are forced draft, induced draft, over fire air and combustion air.

Large Industrial Fan Characteristics

At this juncture it is prudent to reiterate that a fan running at a particular speed can have an infinite number of operating points all along its characteristic curve. The fan will interact with the system to produce an operating point at the intersection of the system curve and the fan curve. Note that it is the system in which the fan is installed that will determine the operating point on the fan curve. Thus it is vitally important that the system designer accurately determine the system losses in order to ensure that the actual air flow rate is as close as possible to the design air flow rate.

For additional information please refer to http://www.northernindustrialsupplycompany.com/outside/request4.html

Oleg Chetchel
Industrial Process Equipment Engineer
airknife@cogeco.ca
Northern Fan Co.
http://www.northernindustrialsupplycompany.com/outside/request5.html
http://www.northernindustrialsupplycompany.com/outside/request3.html

Industrial Processes Ventilating

airknife@cogeco.ca

combustion blower,turbo blower,high pressure blower,pressure blower,industrial,regenerative blower,side channel blower

industrial ventilation,industrial ventilating,industrial fan,industrial blower,industrial ventilator,industrial pressure blower

buffaloblowercom

buffalofancom

***

Tags: Backward Inclined Blowers, Backward Inclined Direct Drive Blower, Belt Drive Blower, Belt Drive Propeller Fans, Blower Fan Suppliers, Centrifugal Blower Fan, Centrifugal Power Fixed Fan,Centrifugal Power Foil Fan, Direct Drive Blower, Forward Curve Belt Drive Blower, Forward Curve Blower, High Temperature Blower,Industrial Blower, Industrial Blower Manufacturer, Industrial Blower Suppliers, Industrial Centrifugal Blower, Industrial Fans and Blowers,Industrial Pressure Blower, Inline Centrifugal Fans, Large Industrial Fan, Plenum Fans, Plug Pak Fans, Propeller Fans, Radial Blade Belt Drive Blowers, Radial Blade Blower, Radial Blade Direct Drive Blowers, Belt Drive Fans, Belt Drive Industrial Fans, Belt Drive Industrial Blowers, Belt Drive Blower Fan, Industrial Large Fans, Industrial Blowers Centrifugal,Industrial Direct Drive Radial Blowers, Large Industrial Blowers, Blower High Temperature, Fans Plenum, Industrial Plenum Fans, Plenum Fan Suppliers, Plenum Fan Manufacturer, Belt Drive Fan Suppliers, Belt Drive Fan Manufacturer, Industrial Centrifugal Blower Supplier,Centrifugal Blower Fan Manufacturer, Propeller Fan Suppliers, Propeller Fan Manufacturer, Belt Drive Radial Blower Supplier, Direct Drive Blower Supplier, Belt Drive Blower Manufacturer,High Temperature Blower Suppliers, High Pressure Blower Supplier,Suppliers Centrifugal Fans,Manufacturers Centrifugal Fans, Centrifugal Industrial Power Fixed,Centrifugal Power Fixed,Centrifugal Power Foil,Industrial Centrifugal Power Fixed,Industrial Forward Curve Blower,Forward Curve Industrial Blower,Forward Curve Blower Supplier,Forward Curve Blower Manufacturer

Industrial Blowers & Fans Ventilation

Thermal oxidizers usually provide the highest possible VOC control and efficiency through high-temperature conversion of hydrocarbons to products of combustion. SysTech provides specialized thermal oxidizers, which include features such as:

Operation at high temperatures to combust solvents into water and carbon dioxide.
High destruction efficiencies which are ideal for use with most VOC applications.
Heat recovery capabilities ranging from 50% to 95% resulting in low operating costs.

Industrial Fan Ventilation Importance

VOCs, or volatile organic compounds are emitted by a wide array of products and processes. Paints, lacquers, cleaning compounds, printing, and a host of other substances found in industrial environments release pollutants into the air that have adverse long and short term health effects. VOC pollution is especially hazardous in the high concentrations found indoors.

Industrial Blowers Fans Applications

Northern Fan Co. custom engineers effective process gas exhaust systems for industrial applications, considering factors such as:

VOC loading of the gas stream;
Regulatory requirements;
Solvent recovery needs;
Lifecycle costs.

Industrial Fans and Blowers Features

Catalytic oxidizers achieve extremely high levels of VOC control at lower temperatures. Northern Integrated Systems Co. provides specialized catalytic oxidizers with features such as:

Little or no natural gas required to sustain required temperatures,
Recuperative catalytic oxidizers, a very cost-efficient way to manage solvent emissions,
Ability to treat nitrogen containing organic compounds without the formation of NOx,
VOC control while consuming less energy due to lower operation temperatures.

Industrial Pressure Blower Safety

Due to NFPA standards and a growing awareness of workplace health and safety hazards, industry has seen an increasing demand for effective explosion protection systems. The flammable gases and combustible dust resulting from many industrial and manufacturing processes create a serious threat, which necessitates dependable explosion prevention. Protection is also needed for potentially explosive environments that include functions such as:

Conveying – Elevators, Pneumatic Ducts, Separators, Vapor Control;
Processing – Coaters, Cookers, Dust Collectors, Dryers, Paint Booths, Sanders;
Pulverizing – Ball Mills, Cage Mills, Flakers, Granulators, Grinders, Shredders;
Storage – Bins, Cyclones, Flammable Liquid Storage Areas, Hoppers, Tanks.

Many explosion prevention measures will comprise an explosion protection system, as well as measures to contain or mitigate potential explosions.

Industrial Blowers and Fans Ventilation

To obtain a reasonable degree of personnel comfort in hot weather, there are three basic factors that should be provided for in the ventilation and cooling system of a commercial or industrial building. The first step toward controlling the hot air problem is to provide for the removal of excessively hot air from the building. This superheated air frequently mixes with the air in the cooler areas of the building to produce an overall temperature increase. As superheated air is frequently localized around heat-producing machinery, it should be exhausted from the building near its source.

For additional information please refer to http://www.northernindustrialsupplycompany.com/burlington/request5.html

Oleg Tchetchel
Industrial Ventilating Designer
airknife@cogeco.ca
Northern Fan Co.
http://www.northernindustrialsupplycompany.com/burlington/request7.html
http://www.northernindustrialsupplycompany.com/burlington/request2.html

Industrial Ventilation System with Power Fans

ventilation,ventilating,industrial,fan,blower,ventilator,exhaust,air,gas,fume,process,OEM,New York Blower,NYB,Twin City,TCF

Oleg Tchetchel

airknife@cogeco.ca

***

Industrial Fans and Blowers

Industrial Fans & Blowers

Industrial electric fans clearly do not use as much electricity as an air conditioner, circulating air and cooling it at a fast rate for a large space. With high-powered, energy-efficient motors, the larger motor of an industrial fan is actually guaranteed to save energy costs.

Industrial Pressure Fan

Air conditioning can often become too large of an expense for industrial areas, but the good news is that an industrial fan can bring some much needed relief in this case. Industrial electric fans can be quite helpful for places where heat stratification, dampness, and stagnant air become frequent problems. Also, for high static pressure an industrial fan is what you need. Also known as an industrial electric blower, these units replace air as well by blowing out the old and stagnant air for a wide area that otherwise would collect this air without replenishing it in entirety.

Large Industrial Fans

Industrial warehouses, especially profit from these large units because the fans can support a higher CFM rating without the vibrations of a smaller fan. Most electric industrial fans have blades of a higher more durable construction, usually consisting of some kind of metal. This allows the blades to move more air at one time without all the force being applied to the fan and making the motor work harder.

Industrial Fan Types

Industrial fans include several types such as duct fans, roof and ceiling ventilators, wall mounted fans, pressure blowers, and freestanding units with different mounting options. For extreme conditions and plants, drum fans can be used to move even larger amounts of air. These types of fans come with wheels attached and can be rolled to the area that circulation is needed the most. Some manufacturers even sell just the fan heads for a more freedom and a reduced assembly and cost on the company.

Industrial Fan Motors

Powerful motors for reducing excessive noise are used in industrial fans. The motor will not be working at its top speed to produce the necessary airflow, therefore it will be quieter. Industrial electric fans are also very versatile; there are floor fans, wall mounted fans, and pedestal fans that all come in industrial grades. If you plan on a very large space, a pivoting fan is a good choice as you can manipulate the direction of the air and direct it to where it is needed most. Some even come with stands to make these larger fans easy to roll from place to place.

Electric Industrial Fans

These motors are designed to change a large amount of electrical energy into useful fan work. Often as electric industrial fans are in operation for an entire day period, opposed to a home fan which is turned on only when people are home, or in a specific room, the industrial fan needs to be energy efficient for this extra use. These motors can handle more heat than a normal motor meaning less heat waste is produced. If you think you need an industrial fan for your business area, chances are that you do! Make the choice today for comfort and health and consider an industrial fan purchase.

Additional information can be found at the Northern Industrial web site http://www.northernindustrialsupplycompany.com/products/heat_exchangers.html

Oleg Cthetchel
Canadian Air Systems Engineer
Northern Industrial Co.
http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html
http://northernindustrialsupplycompany.com/products/ventilators.html

Industrial Fan for Process Ventilation

ventilator fan blower PRV propeller industrial building ventilation ventilating cooling high volume air circulation circulating wall roof exhaust supply circulator recirculator mobile exhauster

fan@cogeco.ca

nisco@primus.ca

http://www.nisco.net/tchetchel.gif

ventilator,fan,blower,PRV,propeller,industrial,building,ventilation,ventilating,cooling,high,volume,air,circulation,circulating,wall,roof,exhaust,supply,circulator,recirculator,mobile,exhauster

***

Centrifugal Industrial Blowers and Centrifugal Fans

Centrifugal Industrial Fans and Blowers

The majority of industrial centrifugal fans and blowers can be grouped into three broad categories; custom engineered, pre-engineered and OEM. All are supplied to the same exacting standards.

Centrifugal blowers and fans

Canada centrifugal blowers and fans are found throughout the world operating in industrial processes where performance, reliability and maintainability are of paramount importance. Ranging in diameter from 12″ to over 96″, and with a variety of impeller designs, control systems and layout options, they form a comprehensive series of centrifugal fans to satisfy virtually all industrial applications.

Industrial Centrifugal Fans

Canada Blower pre-engineered centrifugal fans are selected aerodynamically from a range of standard sizes and configured mechanically to meet the customer’s requirements. This allows to provide a cost-effective solution to moving air or gas where the additional cost of a custom engineered fan is not justified either by higher efficiency or mechanical strength. Centrifugal fans store significant amounts of energy when running, and if the fan is not correctly matched with the operating conditions the consequences for the plant operator can include excessive power consumption, noise generation or mechanical failure, resulting in a significant loss of revenue.

Industrial Centrifugal Blowers

Each of Canada blower designs has been exhaustively tested, aerodynamically and acoustically. The mechanical design is supported by modern analysis techniques, such as finite element analysis. Many options are available in terms of drive arrangement, output control, layout and auxilliary equipment, to give flexibility to the plant designer. All major impeller configurations are supplied including aerofoil, backward curved, backward inclined and radial tipped blade designs.

Centrifugal Fans

Canada Blower custom engineered centrifugal fans are designed specifically for each contract which allows us to apply a combination of experience, advanced design techniques and a knowledge of the operating conditions to select the optimum fan in terms of capital cost, running cost, maintainability and reliability. Large centrifugal fan rotors store significant amounts of energy when running. If the fan is not designed and manufactured correctly, and matched with the operating conditions, the consequences for the plant operator can include excessive power consumption, noise generation, vibration and mechanical failure, resulting in a significant loss of revenue.

Centrifugal Blowers

Each of centrifugal blower or fan designs has been exhaustively tested, aerodynamically and acoustically. Empirical design formulae that have been validated over many years are backed up with modern analysis techniques, including finite element analysis, dynamic response analysis and computational fluid dynamics.

Heavy-duty Centrifugal Blowers & Fans for Industrial Applications

It is this combination of knowledge and experience that has resulted in Canada Blower becoming a global market leader in heavy-duty centrifugal blowers and fans.

Additional information can be found at the Canada Blower company web site http://www.canadablower.com

Susan Terlitski
Industrial Air Make-Up Systems Designer
canadablower@canadablower.com
Canada Blower Co.
http://www.canadablower.com/blowers/index.html
http://www.canadablower.com/fans/index.html

Preengineered and Custom Canada Blower Fans

canadablower@canadablower.com

blower,fan,industrial,centrifugal,Howden,New York Blower,NYB,OEM,TCF,radial,processhigh temperature,high pressure

buffaloblower@buffaloblower.com

***